Finer Options for the Best House Measurements

When calculating the area of ​​a room, you need to decide whether to take into account that part of it that is covered with plinths. If this is the case, then measurements should be taken with a tape measure along the walls, but above the baseboards. The use of the measuring musts is there as well.

Wall area measurement

As in the other cases, the peculiarities of the measurement are determined by the goal that exists at the moment. Most often, this area is measured to stick wallpaper on the walls. To measure the area of ​​the walls, you must first determine the height of the ceiling. Then you need to determine the length of each wall. In the case of a rectangular layout of the room, we will talk about the length and width.

But we must remember that other options are possible. It is convenient to draw on paper the layout of the room and measure its perimeter. Multiplying this value by the height of the room, we get a preliminary result. To paste the wallpaper, you will need to subtract the area of ​​windows and doors from the resulting area.

You also need to take into account all sorts of projections and recesses in the walls. Depending on whether they will be covered with wallpaper, you will need to take into account their value. Also important may be the fact that the wallpapering can be made not to the ceiling itself. The corresponding amendment will also need to be taken into account.

The procedure in question implies that the ceiling height throughout the room will be the same. This is not always the case. For example, the attic may have a trapezoidal wall shape. Therefore, in the measurement process, one should carefully monitor the verticality or horizontality of the measured lines.

Measuring the area of ​​windows and doors

For windows and doors to be taken into account when determining the area of ​​the walls, it is necessary to measure their area correctly. If the definition of the area is connected, for example, with the gluing of wallpaper, then it will be correct to measure the area of ​​the windows by their outer side and the doors by the outer edge of their frame.

Why do you need such measurements?

Briefly formulate, for which you need to measure the area of ​​available rooms. One of the most common reasons is that these figures will allow you to calculate the cost of the upcoming repairs. In many cases, the volume of work carried out, the rates of work of specialists can be pre-estimated using data on the area of ​​the repaired premises and certain known coefficients.

To verify the correctness of payment for repairs, it is important to independently perform the necessary measuring work. This will, in some cases, avoid overcharging.

In some real estate transactions, knowledge of the floor space is essential. Taking appropriate measurements and the ability to read building schemes will provide important assistance in assessing the real qualities of the living space. This is useful when choosing rental options or when there is a purchase or sale of real estate.

One of the interesting applications is the planning of illumination of rooms. There are detailed standards for which it is necessary to know the area of ​​the lit room. Finally, we note that knowing the area of ​​the room, it is easy to determine its volume. On this basis, you can expect the need for heating, climate, or ventilation devices.